Inquiry
Form loading...
Zl-300 Stainless Steel Rotary Large Output Feed Granulation

Granulator machines

Products Categories
Featured Products

Zl-300 Stainless Steel Rotary Large Output Feed Granulation

ZL rotary pellet machine is widely used in pharmaceutical, food, granules, chemical, solid beverage and other industries, will be made of good mixing of the required particles, can also be used to smash the waste and dry pieces and crushed into particles. The utility model is especially suitable for materials with high viscosity. This machine and material contact parts are made of stainless steel, beautiful appearance, reasonable structure, high efficiency of granulation, granule appearance, automatic discharge, avoid artificial particle breakage caused by particles, and is suitable for water work. Through the mechanical rotating grinding blade and pressing the leaf to do the opposite rotation, pressing Ye Cheng angle to make the material down into grinding blade angle spiral grinding blade on leaf material to speak sieve tube wall, through the blade material from screening hole extruded particles.

    product Features

    (1) All parts in contact with materials are made of stainless steel.

    (2) The transmission mechanism consists of a V-belt and three pairs of spur gear transmissions.

    (3) Working principle: The motor changes speed and direction through a gearbox, causing the grinding blade and pressing blade to rotate in opposite directions,

    The pressure blade presses the material down through an inclined plane, and the grinding blade squeezes the material towards the outside of the sieve cylinder, forming uniformly shaped particles.

    ZL-300 Granulator (3)ufa

    Technical parameters

    Model

    ZL250

    ZL300

    Milling cutter size (L)

    250

    300

    Granulation diameter(mm)

    2 - 2.2(According to customer needs)

    1.8 - 2.5 (According to customer needs)

    Production capacity(pcs/h) 

    100-200

    140-400

    Motor(kw) 

    3.0

    4.0

    Overall size(mm)

    700*540*1300

    880*640*1300

    Net weight(kg) 

    350

    400

    Maintenance

    (1) The flexibility, wear and sealing of each moving part should be checked regularly 3-5 times a month, and any problems found should be repaired in a timely manner.

    (2) The lubricating oil in the reduction box should be replaced regularly. Generally, new machines are replaced once every three months and once every six months in the future. The lubricating oil should be N46 in summer and N32 in winter. The amount of oil is suitable for the grinding shaft gear to be immersed in half of the tooth surface height. The oil level can be observed through the sight window.

    (3) After one use or shutdown, the material should be taken out and the screen cylinder, nuts, pressing blades, and grinding knives should be removed, and the above workpieces should be scrubbed clean (note that electrical appliances are affected by moisture).